Ultimate Equilibrium of RC Structures Using Mini-Max Principle

Iakov Iskhakov, PhD and Yuri Ribakov, PhD
Department of Civil Engineering, Ariel University, Ariel, Israel

Series: Mechanical Engineering Theory and Applications
BISAC: TEC000000

Clear

$69.00

Volume 10

Issue 1

Volume 2

Volume 3

Special issue: Resilience in breaking the cycle of children’s environmental health disparities
Edited by I Leslie Rubin, Robert J Geller, Abby Mutic, Benjamin A Gitterman, Nathan Mutic, Wayne Garfinkel, Claire D Coles, Kurt Martinuzzi, and Joav Merrick

eBook

Digitally watermarked, DRM-free.
Immediate eBook download after purchase.

Product price
Additional options total:
Order total:

Quantity:

Details

This monograph analyses experimental and theoretical investigations in the field of reinforced concrete structures and elements from the viewpoint of a new mini-max principle and application of this principle for calculation of forces, strengths and critical buckling loads in RC shells, columns, plates, etc. The basis of the mini-max principle was developed during solving a problem of finding an RC shell load bearing capacity via a kinematic method. Forming the internal forces’ fields at the plastic stage of the structure leads to a problem, related to interaction between the normal forces and bending moments, but at this stage the compressed shell section has an unknown eccentricity. Therefore an additional equation should be found for separating the above-mentioned forces. The following idea was proposed: the section compressed zone depth (static parameter) should be selected so that the maximum load bearing capacity of the structure is realized simultaneously with minimizing the external load the failure zone dimension (kinematic parameter).

Development of this idea resulted in formulating the mini-max principle. The essence of this principle is that real load bearing capacity of the structure is calculated (without under- and over-estimation). With this aim it is proposed to use in the same calculation both extreme features of failure load. At the same time just one method is used (static or kinematic). Thus, the mini-max principle became a way for realizing the unity theorem of the limit equilibrium method, which joints the static and kinematic approaches. The mini-max principle enabled to solve some problems in load bearing capacity of structures that had no solutions or were solved approximately. Additionally, the principle was used for solving some new problems in calculation of RC shells. (Imprint: Novinka )

Preface

Chapter 1 - Introduction (pp. 1-6)

Chapter 2 - Prerequisites of the Mini-Max Principle (pp. 7-40)

Chapter 3 - Mini-Max Principle as a Tool for Calculation of RC Structural Bearing Capacity (pp. 41-72)

Chapter 4 - Using the Mini-Max Principle in Calculating the Bearing Capacity of RC Structures (pp. 73-112)

Index

"The book Ultimate Equilibrium of RC Structures Using Mini-Max Principle written by Prof. I. Iskhakov and Prof. Y. Ribakov, summarizes some experimental and theoretical results of reinforced concrete structures investigation. The authors successfully use the mini-max principle for design of spatial and plane RC structures." READ MORE... - Leonid Dvorkin, Dr. Prof., Head of Building Materials, National University of Water Management and Nature Resources Use

You have not viewed any product yet.