Table of Contents

Preface

Part I. Processing Techniques

Chapter 1. MIG Welding with 1 mm Filler Diameter to the Mechanical Properties of Welded Joints of Commercial Steel
(E. Santoso, I. Wahid and M. Nafi – Department of Mechanical Engineering University of 17 Agustus 1945 Surabaya, Indonesia)

Chapter 2. Experimental Study of Impact Energy on Coal Ash Composite as the Base Material of 3-Leaf Propeller Getting T6 Heat Treatment and Artificial Aging
(Zainun Achmad, Al Emran Ismail and Taufik Hidayat Safril Iman – Mechanical Engineering Study Program, Faculty of Engineering, University of 17 August 1945 Surabaya, Surabaya, Indonesia)

Chapter 3. Influence of Burnt Mine Rocks and Ash-slag Waste on the Physical and Mechanical Properties of Ceramic
(N. I. Buravchuk and O. V. Guryanova – Southern Federal University, Rostov-on-Don, Russia)

Chapter 4. Effect of Variation in the Composition of the Basic Ingredients and Briquette Pressure on Calorific Value and Temperature Value of the Briquette Mixture of Rice Husk and Coconut Shell
(Muhyin, D. Y. Rakhmawati and F. R. Witjaksono – University of 17 Agustus 1945 Surabaya, Surabaya, Indonesia)

Part II. Physics and Mathematics

Chapter 5. An Approach for Linear Systems with Uncertainty
(Yu. E. Drobotov and T. M. Andreeva – Southern Federal University, Rostov-on-Don, Russia)

Chapter 6. On Properties of the Riesz Potential Type Operator in the Spaces of Holomorphic Functions
(T. M. Andreeva and Yu. E. Drobotov – Southern Federal University, Rostov-on-Don, Russia)

Chapter 7. On Multipliers of Spherical Convolution Operators with Power-Logarithmic Kernels
(Yu. E. Drobotov and T. M. Andreeva – Southern Federal University, Rostov-on-Don, Russia)

Chapter 8. On a Spatial Hypersingular Integral Equation with a Specific Characteristic
(Yu. E. Drobotov and H. H. Zubarieva – Southern Federal University, Rostov-on-Don, Russia)

Chapter 9. Destruction Phenomena in Niobate Ferroceramics
(K. P. Andryushin, M. I. Kovalenko, S. I. Dudkina and L. A. Reznichenko – Southern Federal University, Rostov-on-Don, Russia)

Chapter 10. Phase Patterns and Electrophysical Macro Responses in Solid Solutions of the Multicomponent Systems Based on Lead Zirconate Titanate
(S. I. Dudkina, L. A. Shilkina, K. P. Andryushin, I. A. Verbenko and L. A. Reznichenko – Southern Federal University, Research Institute of Physics, Rostov-on-Don, Russia)

Chapter 11. Dielectric Tunability of Multicomponent Relaxor Ceramics
(M. V. Talanov – Research Institute of Physics, Southern Federal University, Rostov-on-Don, Russia)

Chapter 12. On Registration of the Parameters of Oscillatory Processes by Optical Interference Displacement Meter
(I. P. Miroshnichenko and I. A. Parinov – Don State Technical University, Rostov-on-Don, Russia, et al.)

Chapter 13. The Treatment of Restaurant Wastewater Containing Oil and Grease by Using Immersed Membrane Bioreactor: Application and its Maintenance in Indonesia
(Supardi and Elisa Sulistyorini – Mechanical Engineering, University of 17 Agustus 1945 Surabaya, Indonesia)

Part III. Mechanics

Chapter 14. Parametric Modeling of Lightweight Floor Slabs in the ANSYS WORKBENCH Software
(O. V. Shilyaeva, I. A. Zen’kovskij, A. V. Cherpakov and I. A. Parinov – Southern Federal University, Rostov-on-Don, Russia, et al.)

Chapter 15. Mechanical Properties and Microstructure Analysis of Heated Aluminum-2042 with Variation of Aging Temperature and Aging Time
(I. Wahid and M. Nafi – Department of Mechanical Engineering, University of 17 Agustus 1945 Surabaya, Indonesia)

Chapter 16. Microstructure and Tensile Stress Analysis on T6 Heat Treated Aluminum-Bottom Ash Coal Composite made by Squeeze Casting
(M. Nafi and H. Seputro – Department of Mechanical Engineering, University of 17 Agustus 1945 Surabaya, Surabaya, Indonesia)

Chapter 17. Tensile Stress at Symmetric Notches of Hyperbolic Form with Arbitrary Focal Length
(Yu. E. Drobotov – Southern Federal University, Rostov-on-Don, Russia)

Chapter 18. Local Approximation of Elastic Projection Contour for Evaluating Stress Concentration
(Yu. E. Drobotov and T. M. Andreeva – Southern Federal University, Rostov-on-Don, Russia)

Chapter 19. Specific Properties of a Contact Approach Function for the Axes of Two Elastic Cylinders
(Yu. E. Drobotov and T. M. Andreeva – Southern Federal University, Rostov-on-Don, Russia)

Chapter 20. On the Influence of Elastic Cylinders’ Radii on Contact Deformations
(G. A. Zhuravlev and Yu. E. Drobotov – Southern Federal University, Rostov-on-Don, Russia)

Chapter 21. Features of Deep Stresses Distribution in the Contact Area of Parallel Elastic Cylinders
(G. A. Zhuravlev and Yu. E. Drobotov – Southern Federal University, Rostov-on-Don, Russia)

Chapter 22. Occurrence of 3D Periodic Convective Flows in a Vertical Layer with Moving Boundaries
(N. V. Andros and I. V. Morshneva – Southern Federal University, Rostov-on-Don, Russia)

Chapter 23. A Solution to the Equations of Fluid Motion
(Yu. E. Drobotov – Southern Federal University, Rostov-on-Don, Russia)

Part IV. Applications

Chapter 24. Surface Acoustic Wave Sensors of Breath
(V. G. Dneprovski and I. A. Parinov – Southern Federal University, Rostov-on-Don, Russia)

Chapter 25. Nut Height Effect on Anti-loosening Performance of Pitch Difference Bolt Nut Connections
(B. Wang, N. A. Noda, Y. K. Sano, X. Liu, Y. Inui and B. F. Siew – Kyushu Institute of Technology, Kitakyushu-shi, Japan)

Chapter 26. Design of a Hardware Complex for Collecting Telemetry data for Metal Structures
(A. A. Lyapin and A. S. Lisochenko – Don State Technical University, Rostov-on-Don, Russia)

Chapter 27. Analysis of Dynamic Signals Received from Construction Sites: Use of a Neural Network in the Analysis of Signals about the Behavior of the Object of Observation
(A. A. Lyapin and D. V. Klimenko – Don State Technical University, Rostov-on-Don, Russia)

Chapter 28. Encryption Key Negotiation Protocol Using Elliptic Curves Over a Finite Field for the Arduino Smart Home Project
(K. G. Bukhanevich, I. V. Mukhamedov and Ya. A. Kokareva – Don State Technical University, Rostov-on-Don, Russia)

Chapter 29. Development of Web-Service for the Registration of the Housing and Сommunal Services Data Based on GSM-Radio-Modem Information
(G. B. Anisimova and M. V. Seryachenko – Don State Technical University, Rostov-on-Don, Russia)

Chapter 30. Development of a Geographic Information System for Express Delivery of Small-sized Cargoes using Drones
(K. P. Saprykin and A. Yu. Drozdov – Don State Technical University, Rostov-on-Don, Russia)

Part V. Industry and Management

Chapter 31. The Survival Strategy of Indonesia MSMEs Development in Facing the Economic Crisis due to the COVID-19 Outbreak
(Erni Puspanantasari Putri and Victoria Aurellia Sri Paramita Putri – Department of Industrial Engineering, University of 17 Agustus 1945 (UNTAG), Surabaya, Indonesia, et al.)

Chapter 32. A System Dynamics Approach to Risk Mitigation in Performance-based Contract Projects
(H. T. Tjendani, W. Oetomo, R. Marleno and E. Wulandari – Magister Teknik Sipil, Surabaya, Surabaya, Indonesia)

Chapter 33. A Case Study of Renewable Energy Development in Indonesia
(Victoria Aurellia Sri Paramita Putri and Erni Puspanantasari Putri – Department of Industrial Engineering, University of Pembangunan Nasional Veteran (UPN Veteran) East Java, Surabaya, Indonesia, et al.)

Chapter 34. Optimization and Management Strategy Resources for Water Fulfillment of Community Water in Mojokerto District, East Java
(L. D. Nugroho, T. W. Rejeki, Hudhiyantoro and B. Santoso – University of 17 Agustus 1945 Surabaya, Surabaya, Indonesia)

Chapter 35. A Case Study: Application of Business Process Re-engineering in the Company
(Erni Puspanantasari Putri and Sukon Aduldaecha – Department of Industrial Engineering, University of 17 Agustus 1945 (UNTAG), Surabaya, Indonesia, et al.)

Chapter 36. Case Study of the Keys to Success of Supply Chain Management in Company
(Erni Puspanantasari Putri and Sukon Aduldaecha – Department of Industrial Engineering, University of 17 Agustus 1945 (UNTAG), Surabaya, Indonesia)

Chapter 37. Analysis of Resistance Factor and Application Strategy of Work Safety and Health Application in Construction Project Workers in Tulungagung Regency
(Sajiyo and F. M. Azhari – University of 17 Agustus 1945 Surabaya, Surabaya, Indonesia)

Chapter 38. A Case Study of Creative Industry Development Strategy in Sidoarjo Regency, East Java Province, Indonesia
(Erni Puspanantasari Putri and Victoria Aurellia Sri Paramita Putri – Department of Industrial Engineering, University of 17 Agustus 1945 (UNTAG), Surabaya, Indonesia, et al.)

Chapter 39. Designing Electric Powered Tourism Ship for Surabaya City
(R. A. Retno Hastijanti and Muhammad Bayu Abisatya – Architecture Department, University of 17 Augustus 1945 Surabaya, Indonesia, et al.)

Chapter 40. Development Strategy of Creative Economy and Creative Industry in Surabaya City, Indonesia
(Erni Puspanantasari Putri, and Victoria Aurellia Sri Paramita Putri – Department of Industrial Engineering, University of 17 Agustus 1945 (UNTAG), Surabaya, Indonesia, et al.)

Chapter 41. Is the Majority Gypsum for Ceiling Choosing on Housing and Buildings in Surabaya, Indonesia?
(Uniek Praptiningrum W. and Joko Santoso – Department of Architecture, University of 17 Agustus 1945, Surabaya, Indonesia)

Index