Proceedings of the 2019 International Conference on “Physics, Mechanics of New Materials and Their Applications”

$120.00

Ivan A. Parinov (Editor)
I. I. Vorovich Mathematics, Mechanics and Computer Sciences Institute, Southern Federal University, Chief Research Fellow, Rostov-on-Don, Russia

Shun-Hsyung Chang, PhD (Editor)
National Kaohsiung Marine University, Department of Microelectronics Engineering, Kaohsiung City, Taiwan

Banh Tien Long, PhD (Editor)
President of Vietnam Association for Science Editing, President of Council of Asian Science Editors, Vice President of Vietnam Federation of Mechanical Engineering Associations, Ha Noi, Vietnam

Series: Physics Research and Technology
BISAC: SCI055000

The developed original principles and approaches for prospective materials and composites (including, nanostructures, crystals, films, coatings and functional materials) determine the main achievements and directions of modern natural and technical sciences, technologies, techniques and industry. Advanced chemical, physical and mechanical studies, modern numerical approaches and methods of mathematical modeling and physical experiment directly improve the materials and devices characteristics.

These PHENMA 2019 Proceedings are devoted to development and solution of various actual problems into framework of five scientific directions, namely processing techniques, physics, mechanics and applications of advanced materials and also their industry and management. The proposed book presents novel original results in theoretical, computational and test methods, which allow fabrication of materials and composites with structure-sensitive properties at different scale levels. The materials could be obtained due to reprocessing natural materials, wasters, fruits and plants.

These Proceedings also discuss results of mathematical modeling and experimental studies of modern devices (piezoelectric transducers, different sensors, medical devices etc.). The presented studies are based on the new generation of nano-structures and corresponding approaches. The book considers promising modern nano- and microstructure techniques for manufacture of various new materials and devices, which are very important for educational purposes and industry, unification and development of different examinations, designs and analyzes.

The book presents new results of internationally recognized scientific teams in different areas of Condensed Matter Physics, Materials Science, Physical and Mechanical Experiment, Processing Techniques and Engineering of Advanced Materials and Composites, Numerical Methods.

These results are devoted to R&D of advanced nanostructures, other promise materials and composites with specific properties, based on the developed processing techniques and modern approaches of chemistry, physics, mechanics and materials science, and also wide spectrum of applications including industry and management. The book presents new results, obtained on the base of original mathematical models, physical experiments, computer modeling, nano- and piezoelectric applications.

This collection presents selected reports of the 2019 International Conference on “Physics, Mechanics of New Materials and Their Applications” (PHENMA 2019, November 7-10, 2019, Hanoi, Vietnam), http://phenma2019.math.sfedu.ru.
The book will be very useful to students, post-graduate students, scientists and engineers, participating in investigation and development of a new generation of advanced materials and composites, and also different devices, fabricated on their base and intended for numerous applications in different areas of science, technique and technology.

Clear

Details

Table of Contents

Preface

Part 1. Processing Techniques

Chapter 1. Selective Laser Sintering of Ti-6Al-4V Powders Directly on the Substrate without Support Parts and Its Properties
(Nguyen Minh Thuyet and Jin-Chun Kim, School of Materials Science and Engineering, Hanoi University of Science and Technology, No.1, Dai Co Viet, Hai Ba Trung, Hanoi, Vietnam, and others)

Chapter 2. The Study on the Effect of Technology Parameters on Surface Roughness in the Grinding of Ti-6Al-4V Alloy with Resinoid cBN Grinding Wheel
(Hung Trong Phi, Trung Kien Nguyen, Got Van Hoang, and Son Hoanh Truong, Mechanical and Power Engineering Faculty, Electric Power University, Hanoi, Vietnam, and others)

Chapter 3. Study on Phase Transformation of CMnSi Steel When Heat Treatment
(Nguyen Duong Nam, Tran The Nam, Pham Huy Tung, Mai Ba Linh and Pham Mai Khanh, School of Mechanical Engineering, Viet Nam Maritime University, Lach Tray, Le Chan, Hai Phong, Vietnam, and others)

Chapter 4. Research on the Adhesion of Cr3C2 – NiCr Coating on 40Cr Substrate Coated by HVOF
(Dinh Van Chien, Hanoi University of Mining and Geology, Hanoi, Vietnam)

Chapter 5. InSb Films: Deposition and Properties
(V. G. Dneprovski and E. M. Kaidashev, I. I. Vorovich Mathematics, Mechanics and Computer Science Institute, Southern Federal University, Rostov-on-Don, Russia)

Chapter 6. Corrosion Behavior of Bottom Ash Particle Reinforced 6061 Aluminum Alloy Produced by Squeeze Casting for Bolts and Nuts Applications
(Harjo Seputro, Eko Surojo, Dody Ariawan, Ivan A. Parinov and Shun-Hsyung Chang Department of Mechanical Engineering, University of 17 Agustus 1945 Surabaya, Jawa Timur, Indonesia, and others)

Chapter 7. Influence of Heat Treatment on Grain Size and Hardness of The Aluminum Alloy-Coal Bottom Ash Particle (2.5 wt.%) Composites for Bolts and Nuts Application
(Harjo Seputro, Mastuki1, M. Nafi, E. Surojo and D. Ariawan, Department of Mechanical Engineering, University of 17 Agustus 1945 Surabaya, Jawa Timur, Indonesia, and others)

Chapter 8. Effect of t6 Heat Treatment on the Microstructure and Mechanical Properties of Al 6061 Reinforced with Bottom Ash Particles by Squeeze Casting
(Maula Nafi, Harjo Seputro, Ivan A. Parinov and Shun-Hsyung Chang, Department of Mechanical Engineering, University of 17 Agustus 1945 Surabaya, Indonesia, and others)

Chapter 9. Microstructure and Hardness Analysis of Heated Plate of Aluminum 2075-Bottom Ash Coal Composite
(Maula Nafi, Harjo Seputro, Ardy Chrystian and Ahmad Khoirul Anam, Department of Mechanical Engineering, University of 17 Agustus 1945, Surabaya, Indonesia)

Chapter 10. Analysis of Copper Adding and Aging Time Variable to the Mechanical Properties of Cast Al-Cu Alloy
(Edi Santoso, Ichlas Wahid and Maula Nafi, Department of Mechanical Engineering, University of 17 Agustus 1945 Surabaya, Jawa Timur, Indonesia, Indonesia)

Part 2. Physics

Chapter 11. Simulation of Optoacoustic Response from Axisymmetric Non-spherical Shapes of Red Blood Cells
(Denis A. Kravchuk and K. A. Voronina, Southern Federal University, Institute of Nanotechnology, Electronics and Engineering, Taganrog, Russia)

Chapter 12. Modelling Equilibrium Moisture Isotherm Characteristics of Moringa Oleifera Leaves
(Le Anh Duc, Tran Dinh Khai and Nguyen Hay, Nong Lam University Ho Chi Minh City, Ho Chi Minh City, Vietnam, and others)

Chapter 13. Research of Defective Structure of Crystals LiNbO3:Mg
(N. V. Sidorov, L. A. Bobreva, N. A. Teplyakova and M. N. Palatnikov, Tananaev Institute of Chemistry – Subdivision of the Federal Research Centre “Kola Science Centre of the Russian Academy of Sciences,” Apatity, Russia)

Chapter 14. The Surface Morphology of Anticorrosion Organic Films
(E. N. Sidorenko, S. P. Shpanko, M. A. Bunin and T. I. Debelova, Southern Federal University, Rostov-on-Don, Russia)

Chapter 15. Protective Properties and Physical Characteristics of Organic Films Doped with Haloid Ions
(S. P. Shpanko, E. N. Sidorenko, K. G. Abdulvakhidov and D. A. Grineva, Southern Federal University, Rostov-on-Don, Russia)

Chapter 16. Computational and Theoretical Justification of a Promising Optical Interference Device for Contactless Measurements of the Displacements of Control Object Surface
(I. P. Miroshnichenko, I. A. Parinov and V. P. Sizov, Don State Technical University, Rostov-on-Don, Russia, and others)

Chapter 17. Application of Atmospheric DBD Plasma for Surface Treatment of Cotton Fabric
(Huong Thi Nguyen and Khanh Thi Hong Vu, School of Textile Leather and Fashion, Hanoi University of Science and Technology, Hanoi, Vietnam, and others)

Chapter 18. Composition Effect of Basic Materials and Variations of Adhesive Types on Rice Husk and Coconut Shells Mixed Briquettes
(Muhyin, Dwi Yuli Rakhmawati and Aris Adhi Pratama, Department of Mechanical Engineering, University of 17 Agustus 1945 Surabaya, Surabaya, East Java, Indonesia, and others)

Chapter 19. On the Drying Process in Porous Media: From Basic Concepts and Transport Phenomena to Continuum Modelling
(Hong Thai Vu and Evangelos Tsotsas, School of Chemical Technology, Hanoi University of Science and Technology, Hanoi, Vietnam, and others)

Chapter 20. Effect of Radio Frequency Power in Radio Frequency Assisted Heat PUMP Drying of Ganoderma Lucidum
(Nguyen Hay, Le Anh Duc and Pham Van Kien, Nong Lam University, Ho Chi Minh City, Vietnam, and others)

Chapter 21. An Experimental Investigation on the Heat Transfer Coefficient of CO2 in Minichannel and Microchannel Evaporators
(Kimhang Vo, Thanhthao Nguyen, Thanhtrung Dang, Tronghieu Nguyen and Hoangtuan Nguyen, Department of Thermal Engineering, HCMC University of Technology and Education, Ho Chi Minh City, Vietnam, and others)

Part 3. Mechanics

Chapter 22. Study to Improve the Tensile Strength of Welding Seams when Extrusion Hollow Square Tube Aluminum Alloy by T6 Heat Treatment
(Bui Gia Thinh and Do Anh Tuan, Hai Phong University, Phan Dang Luu, Kien An, Hai Phong, Vietnam, and others)

Chapter 23. Mechanical Properties Analysis of Aluminum Alloy Casting Using Variable of Pouring Temperatures and Cooling Media
(Ichlas Wahid and Mastuki, Department of Mechanical Engineering, University of 17 Agustus 1945 Surabaya, Jawa Timur, Indonesia)

Chapter 24. Investigating the Microhardness on the SKD61 Workpiece Surface in PMEDM Processing
(Van Tao Le, Tien Long Banh, Xuan Thai Tran and Thi Hong Minh Nguyen, Le Quy Don Technical University, Hanoi, Vietnam, and others)

Chapter 25. Simulation of the Cantilever-type PEG with Proof Mass and Active Pinching at Pulse Excitation
(A. N. Soloviev, A. V. Cherpakov, I. A. Parinov, V. A. Chebanenko3, Ya. A. Kokareva and E. V. Rozhkov, Southern Federal University, Rostov-on-Don, Russia, and others)

Chapter 26. Research on the Optimization of Dynamic Vibration Absorber to Damped Linear System under Harmonic Excitation
(Pham Van Tho, Vu Xuan Truong and Khong Doan Dien, Victoria Automobile, Motorbike and Electric Vehicle JSC, Hanoi, Vietnam, and others)

Chapter 27. Vibration Monitoring on Main Diesel Engine of MV.KN168
(Do Duc Luu and Lai Huy Thien, Maritime Research Institute, Vietnam Maritime University, Haiphong, Vietnam)

Chapter 28. Simulation of Vibro-Monitoring on the Gas Turbine Engine of the Naval Ship
(D. D. Luu and L. M. Hai, Doctor of Sciences, Maritime Research Institute, Vietnam Maritime University, Hai Phong, Vietnam, and others)

Chapter 29. Experimental Study on Diesel-Generator Engine TD226B Working with Variable Nozzle Turbine in the Laboratory at Vietnam Maritime University
(D. D. Luu and Ng. Q. Vinh, Doctor of Sciences, Maritime Research Institute, Vietnam Maritime University, Hai Phong, Vietnam, and others)

Chapter 30. Experimental and Theoretical Approach to Assessing the Strength Properties of Layered Tubular Constructions Made of Heavy Concrete
(S. A. Stel’makh, E. M. Shcherban, M. P. Nazhuev, A. V. Cherpakov and I. A. Parinov, Southern Federal University, Rostov-on-Don, Russia, and others)

Chapter 31. Modeling the Process of Stratification of Multilayer Constructions Using the Finite Element Approach
(A. V. Cherpakov, O. V. Shilyaeva, N. A. Papadichev, Y. I. Olegash, I. V. Rudakov, I. V. Veleva,
A. A. Hovakimyan, D. V. Sholokhova and I. A. Parinov, Southern Federal University, Rostov-on-Don, Russia, and others)

Chapter 32. The Selectivity of the Effect of Contact Approach of Elastic Bodies
(G. A. Zhuravlev and T. M. Andreeva, I. I. Vorovich Mathematics, Mechanics and Computer Science Institute, Southern Federal University, Rostov-on-Don, Russia, and others)

Chapter 33. A Study of Determination of Sewing Conditions to Meet the Quality of the Lockstitch Seam on High Quality Men’s Shirts
(Nguyễn Phýõng Linh and Phan Thanh Thao, School of Textile – Leather and Fashion, Hanoi University of Science and Technology, Ha Noi, Vietnam, and others)

Chapter 34. Influence of Elastane Yarn Ratio on Creep Behavior of Single Jersey Fabrics
(Nguyen Thi Tu Trinh and Chu Dieu Huong, Hanoi University of Science and Technology, Hanoi, Vietnam)

Part 4. Applications

Chapter 35. Polymer-Based Capacitive Micromachined Ultrasonic Transducers Applied to Identify Object
(Tung Nhu Nguyen, PhD, Tuan Anh Do, PhD, and Thinh Gia Bui, PhD, Department of Mechanical Engineering, Ha Noi University of Industry, Ha Noi, Vietnam, and others)

Chapter 36. Surface Acoustic Wave Sensors of Vibration
(A. S. Bagdasaryan, V. G. Dneprovski and I. A. Parinov, Kotel’nikov Institute of Radio Engineering and Electronics [IRE] of Russian Academy of Sciences, Moscow, Russia, and others)

Chapter 37. UV Sensor with Coupler in the Form of Two Unidirectional IDTs
(G. Ya. Karapetyan, V. A. Kalinin, M. E. Kutepov, T. A. Minasya and E. M. Kaidashev, Laboratory of Nanomaterials, Southern Federal University, Rostov-on-Don, Russia, and others)

Chapter 38. Experimental Study of 2-Channel Sensor with Narrow-Band IDT
(G. Ya. Karapetyan, V. O. Kislitsin, M. E. Kutepov, T. A. Minasyan and E. M. Kaidashev, Laboratory of Nanomaterials, Southern Federal University, Rostov-on-Don, Russia, and others)

Chapter 39. Assessment of Achievable Distances in the Object Detection by Parametric Profiler
(Igor A. Kirichenko, D. V. Orda-Zhigulina and I. B. Starchenko, Southern Federal University, Institute of Nanotechnology, Electronics and Engineering, Taganrog, Russia, and others)

Chapter 40. Optimal Design Bus Structures to Improve Full Frontal Impact Test Simulation
(Nguyen Phu Thuong Luu, Automotive Engineering Department, Ho Chi Minh University of Technology [HUTECH] University, Ho Chi Minh, Vietnam)

Chapter 41. Simulation Model of Echo Integration Method of Remote Identification of Fish and Zooplankton
(Vyacheslav V. Vishnevetskiy, I. B. Starchenko, D. A. Kolesnik and V. I. Timoshenko, Southern Federal University, Institute of Nanotechnology, Electronics and Engineering, Taganrog, Russia, and others)

Chapter 42. Research, Design and Manufacture of Floating Diving System Flow Cost for Small Autonomous Underwater Vehicle
(Tuan Nguyen Van, Phong Dinh Van and Hung Nguyen Chi, Faculty of Mechanical Engineering – Mechatronics, PHENIKAA University, Hanoi, Vietnam, and others)

Chapter 43. Task about Data Stream of the Minimum Cost on the Basis of a Bionic Algorithm
(O. A. Purchina, A. Yu. Poluyan, D. D. Fugarov and T. P. Skakunova, Don State Technical University, Rostov-on-Don, Russia)

Chapter 44. Performance Evaluation Using PCA-CRS Input Oriented DEA Method: A Case Study of East Java Exports in Indonesia to ASEAN Countries
(Erni Puspanantasari Putri and Chuleeporn Kusoncum, Department of Industrial Engineering, University of 17 Agustus 1945 [UNTAG], Surabaya, Indonesia, and others)

Chapter 45. Research Methods on Water Quality Assessment of Some Field of Hanoi by Combining Data and Monitoring Data
(Dinh Lam Thang, Tran Duc Ha and Dinh Thi Thu Hien, General Department of Sea and Islands, Ministry of Natural Resources and Environment, Hanoi, Vietnam, and others(

Part 5. Industry and Management

Chapter 46. Determination of Suspended Sediment Concentration Using Sentinel 2 Multispectral Data, a Case Study: Day River, Vietnam
(Trinh Le Hung, Dinh Lam Thang, Tran Duc Ha and Dinh Thi Thu Hien, Le Quy Don Universitty, Hanoi, Vietnam, and others)

Chapter 47. Relationship between Spectral Reflectance and Turbidity Content (NTU) of Surface Water in Some Hanoi Basins from Satellite Image Data VNREDSat-1A on December 21, 2017 after Atmospheric Correction
(Dinh Thi Thu Hien and Dinh Lam Thang, Electric Power University, Hanoi, Vietnam, and others)

Chapter 48. Efforts to Develop Coastal Community Economy through Creative Industry Creation
(Erni Puspanantasari Putri and Muslimin Abdulrahim, Department of Industrial Engineering, University of 17 Agustus 1945, Surabaya, Indonesia)

Chapter 49. Waste Management in Surabaya City East Java Province, Indonesia
(Victoria Aurellia Sri Paramita Putri and Erni Puspanantasari Putri, Department of Industrial Engineering, University of Pembangunan Nasional Veteran [UPN Veteran] East Java, Surabaya, Indonesia, and others)

Chapter 50. Recycling Sugar Cane Waste into Organic Fertilizer
(Victoria Aurellia Sri Paramita Putri and Erni Puspanantasari Putri, Department of Industrial Engineering, University of Pembangunan Nasional Veteran [UPN Vetera] East Java, Surabaya, Indonesia, and others)

Chapter 51. The Trend of Lightweight Steel/Galvalume for Structure and Construction of Roof Truss on Housing and Buildings in Surabaya, Indonesia
(W. Uniek Praptiningrum and Joko Santoso, Department of Architecture, University of 17 Agustus 1945,
Surabaya, Indonesia)

Chapter 52. Analysis of Safety and Health of Work and Ergonomics of the Computer Industrial Engineering Laboratory of Brawijaya University
(Sajiyo, Qomariyatus Sholihah and Eko Ludvy Zedniawan, Department of Industrial Engineering, University of 17 Agustus 1945 Surabaya, Indonesia, and others)

Chapter 53. Improving the Drive of a Car
(O. Yu. Goncharov, N. A. Zhdanov and A. V. Cherpakov, Institute of Service, Tourism and Design, North-Caucasus Federal University, Pyatigorsk, Russia, and others)

Additional information

Binding