Manufacturing Systems: Recent Progress and Future Directions


Series: Manufacturing Technology Research
BISAC: TEC020000

Manufacturing has seen progress during the industrial revolution from Industry 1.0 to 4.0. Recent manufacturing processes involve various systems and several challenges remain to handle. For example, the spread of the virus COVID-19 in the late of 2019 has talked many industrial abilities and various manufacturing systems shown incapacities. Therefore, any manufacturing system and process should be improved and tested under crisis scenarios.
The book “Manufacturing Systems: Progress and Future Directions” is a source of the latest research and technical notes in manufacturing systems. This book is useful for students, researchers, and all readers interested in this topic. It is organized into twenty-seven chapters.

Table of Contents

Table of Contents




Chapter 1. Parallel Langmuir Process and Its Application for Silicon Epitaxial Film Manufacturing
(Hitoshi Habuka, Department of Chemistry Applications, Yokohama National University, Yokohama, Kanagawa, Japan)

Chapter 2. Design of Automatic Fishhook Wiring Machinery System
(Hsiung-Cheng Lin, Yi-Juan Lyu and Jhih-Jyun Jhuang, Department, University Name, City, State Department of Electronic Engineering, National Chin-Yi University of Technology, Taichung, Taiwan)

Chapter 3. The Technology of the Strategic Goal-Setting and Monitoring of a Manufacturing System Development on the Basis of Cognitive Mapping
(Zinaida K. Avdeeva, Elena A. Grebenyuk and Svetlana V. Kovriga, Trapeznikov V. A. Institute of Control Sciences of RAS, Moscow, Russia)

Chapter 4. A Clustering-Sequencing Math-Heuristic Approach for the Unequal-Area Facility Layout Problem
(Saeideh Salimpour, Sophie-Charlotte Viaux, Ahmed Azab and Mohammed Fazle Baki, Production and Operations Management Research Laboratory, University of Windsor, Windsor, Ontario, Canada, and others)

Chapter 5. Fast Global Learning for Optimisation and Predictive Maintenance
(Wilson Wang and De Z. Li, Deptartment of Mechanical Engineering, Lakehead University, Thunder Bay, Ontario, Canada, and others)

Chapter 6. Structural Approach to Identification of Nonlinear Manufacturing Systems
(Nikolay N. Karabutov, Department of Control Problems, Russian Technological University, Moscow, Russia)

Chapter 7. Data Integrity in Manufacturing Environments
(Orlando López, E-records Quality Subject Matter Expert)

Chapter 8. The Blood Supply – A Special Manufacturing Process
(Cees Th. Smit Sibinga and Jan Peter Jansen van Galen, IQM Consulting, Zuidhorn, Netherlands, and others)

Chapter 9. Design, Development, Characterization and Application of Smart Polymeric Hydrogel
(Abu Bin Imran, Department of Chemistry, Faculty of Engineering, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh)

Chapter 10. Design of a Computerized Drug Name Catalog to Ensure Patient Safety and Improve the Efficiency of the Process in a University Hospital in Argentina
(Marisa F. Bazzano and Ana V. Fajreldines, Austral University Hospital, and Aleman Hospital, Buenos Aires, Argentina)

Chapter 11. Optimal Design Techniques, Limitations and Uncertainties
(Primož Jelušič and Bojan Žlender, Faculty of Civil Engineering, Transportation, Engineering and Architecture, University of Maribor, Maribor, Slovenia)

Chapter 12. Green Processes to Biofuel Additives Production from Glycerol over Heterogeneous Catalysts
(José E. Castanheiro, Departamento de Química, Escola de Ciências e Tecnologia, Universidade de Évora, Évora, Portugal)

Chapter 13. Outlook of the Heart Valves Manufacturing
(Salvador Castillo Rivera and Ana María Castillo Rivera, Institute of Physics of Cantabria, Spanish Council for Scientific Research, University of Cantabria, Santander, Spain, and others)

Chapter 14. Green Nanotechnology and Its Potential Applications
(Bianca Pizzorno Backx, Otávio Augusto Leitão dos Santos, Mayara Santana dos Santos and Sérgio Antunes Filho, Universidade Federal do Rio de Janeiro, Campus Duque de Caxias, Brazil)

Chapter 15. Indian Forest Act and Sal Leaves: An Offertory for Sustainable Disentanglement
(Suparna Sanyal Mukherjee, Seacom Engineering College, Howrah, West Bengal, India)

Chapter 16. Production Process Condition Monitoring Based on Fuzzy Aggregation
(Sergey Sakulin and Alexander Alfimtsev, Department of Information Systems and Telecommunications, Bauman Moscow State Technical University, Moscow, Russia)

Chapter 17. Near-Net Shape Microholes Formed by Micropunch
(Kelvii Wei Guo, Department of Mechanical and Biomedical Engineering, City University of Hong Kong, Hong Kong)

Chapter 18. Refining of Petroleum Products Using Inorganic Membranes
(Grigory V. Terpugov, Vladimir N. Bobylev, Daniil G. Terpugov and Roman V. Panafidin, D. Mendeleev University of Chemical Technology of Russia, Moscow, Russia)

Chapter 19. Drug Production Optimization Using Experimental Design Methods
(Victor Martinez-Luaces and Mauricio Ohanian, Instituto de Ingeniería Química, Facultad de Ingeniería, UdelaR, Montevideo, Uruguay)

Chapter 20. Chaotic Grey Wolf Optimizer for the Flexible Job Shop Scheduling Problem
(Karama Koubaâ and Nabil Derbel, Control and Energy Management Laboratory [CEMLab], National Engineering School of Sfax, University of Sfax, Sfax, Tunisia)

Chapter 21. Manufacturing Systems in the Production and Supply of Equipment and Services for Healthcare
(Ciro Comparetto and Franco Borruto, Obstetrician and Gynecologist, Florence, Italy, and others)

Chapter 22. Electron Energy Loss Spectroscopy (EELS): Its Description and Application
(Marek Graff, Institute of Nuclear Chemistry and Technology, Warsaw, Poland)

Chapter 23. The Global Economy and Welfare in a Digital Age
(Guy Bäckman and Abo Akademi University, Turku, Finland)

Chapter 24. Green Manufacturing of the Carbohydrate-Binding Agents Using the Shiitake Mushroom
(Olga Tsivileva and Valentina Nikitina, Laboratory of Microbiology, Institute of Biochemistry and Physiology of Plants and Microorganisms, Russian Academy of Sciences, Saratov, Russia)

Chapter 25. Additive Manufacturing in Fashion Design: Exploring Fabrication and Students Perception
(Adriana Yumi Sato Duarte, Bruna Monique Souza Silva, Matheus Corrêa and Franco Giuseppe Dedini, Nossa Senhora do Patrocínio University, Salto, São Paulo, Brazil, and others)

Chapter 26. The Manufacturing Industry in Bulgaria as a Member of the European Union: Fidoks Bulgaria Ltd. (Karlovo, Bulgaria)
(Lolita Nikolova, Karlovo Academy, Karlovo, Bulgaria)

Chapter 27. Manufacturing Practices in Technical Vocational Education and Training Institutions of South Africa
(Lukanda Kalobo and Gregory Alexander, Department of Mathematics, Science and Technology Education, Central University of Technology, Free State, South Africa, and others)


Additional information



Publish with Nova Science Publishers

We publish over 800 titles annually by leading researchers from around the world. Submit a Book Proposal Now!