Ceramic Materials: Synthesis, Performance and Applications

$130.00

Jacqueline Perez (Editor)

Series: Materials Science and Technologies
BISAC: TEC021000

This book discusses the synthesis, performance and applications of ceramic materials. Chapter One presents the recycling of biomass ashes in the obtaining of clay bricks for possible use as construction material. Chapter Two summarizes the use of nanostructured ceramics for the control of heat flows. Chapter Three deals with analytical modelling of thermal stresses in a multi-particle-matrix system with isotropic cylindrical particles which are periodically distributed in an isotropic infinite matrix. Chapter Four deals with analytical modelling of thermal stresses which originate during a cooling process of an elastic solid continuum. Chapter Five provides recent information on the use of zirconia in dentistry, its characteristics and indications, with a particular emphasis on surface conditioning methods to promote adhesion of resin-based materials to zirconia. (Imprint: Nova)

Clear

Details

Table of Contents

Preface

Chapter 1. Evaluation of Fly and Bottom Ash of Different Biomass Combustion as Raw Materials in Clay-Based Ceramics
D. Eliche-Quesada, M.A. Felipe-Sesé, A. Infantes-Molina (Department of Chemical, Environmental, and Materials Engineering, Higher Polytechnic School of Jaén, University of Jaén, Jaén, Spain, and others)

Chapter 2. Nanostructured Ceramics for the Control of Heat Flows
Evgenii I. Salamatov, Oksana V. Karban, Efim N. Khasanov, and Andrey V Taranov (Physical-Technical Institute UB RAS, Izhevsk, Russia, and others)

Chapter 3. Analytical Model of Thermal Stresses in Multi-Component Materials with Cylindrical Particles
Ladislav Ceniga (Institute of Materials Research, Slovak Academy of Sciences, Watsonova, Kosice, Slovak Republic)

Chapter 4. Analytical Model of Thermal Stresses in Multi-Component Porous Materials
Ladislav Ceniga (Institute of Materials Research, Slovak Academy of Sciences, Watsonova, Kosice, Slovak Republic)

Chapter 5. An Update of Current Knowledge on Adhesion to Zirconia Dental Restorations
Engler MLPD, Ruales E, Özcan M, and Volpato CAM (Department of Dentistry, Federal University of Santa Catarina, Florianópolis, Brazil, and others)

Index

Additional information

Binding

,